你要买什么?
For gas turbine pressure regulating stations, the ESD (Emergency Shutdown Valve) acts as the critical safety barrier to cut off natural gas supply under abnormal conditions. Single-solenoid pneumatic control has long been a pain point, as a single solenoid failure can trigger unexpected valve closure and unit trip. GEKO Valve introduces a proven series-parallel dual two-position three-way solenoid configuration to boost the safety and availability of ESD valves for gas power plants.

The control loop adopts two 2-position 3-way solenoid valves arranged in a special series-parallel pneumatic layout. Under normal steady operation, both Solenoid 1 and Solenoid 2 remain energized continuously. Port 2 connects to Port 1 while exhaust Port 3 is sealed. Compressed air flows through Solenoid 1 to supply air pressure to the pneumatic actuator of the GEKO ESD valve.
If Solenoid 1 fails and de-energizes, its Port 1 switches to exhaust Port 3 and Port 2 is blocked. Thanks to the series-parallel layout, compressed air can still pass through Solenoid 2 and feed the ESD actuator. The GEKO ESD valve maintains its open position without losing air supply, avoiding nuisance shutdown.
To close the ESD valve for safety isolation, both solenoid valves must de-energize at the same time. Once both lose power, Port 2 of each solenoid is shut off, and Port 1 communicates with exhaust Port 3. The actuator air pressure vents out, and the GEKO fail-safe ESD valve closes immediately to isolate natural gas flow. With this design, the ESD valve will only trip when both solenoids malfunction, greatly lowering false trip risk.
Dual solenoid pneumatic redundancy alone is not enough. If both solenoids share one single power source, simultaneous power loss will still cause unintended ESD valve closure. GEKO recommends an independent redundant power architecture for this safety loop:
This separated power scheme eliminates common-cause power failure and matches the high safety requirement of gas turbine SIS loops.
Redundant hardware cannot replace routine management. GEKO Valve advises plant operators to build a complete solenoid asset management system:
GEKO emergency shutdown valves are engineered for natural gas, combined cycle power and process safety applications. Matched with optimized dual-solenoid redundant control solutions, GEKO ESD valves balance high safety integrity and operational availability. The fail-close pneumatic actuator package, certified sealing performance and robust construction make them a trusted choice for critical gas isolation duty on turbine regulating skids.
Series-parallel dual 3-way solenoid control is a practical and cost-effective upgrade to reduce nuisance trips of ESD valves. Combined with independent dual power supply and scheduled functional testing, this architecture delivers reliable safety protection for gas turbine sites. If you need technical support or quotation for GEKO ESD valves and solenoid control manifolds for your regulating station, contact our engineering team today.